Skip to main content

BMW Clutch Installation Guide: What’s That in the Middle of the Pressure Plate?

 


🧰 BMW Clutch Installation Guide: What’s That in the Middle of the Pressure Plate?



If you’re tackling a BMW clutch replacement for the first time, you might be wondering what that strange part in the middle of the pressure plate actually does. In my latest video, I walk you through how to fit a clutch on a BMW, step by step — and explain exactly what that centre piece is, and why it’s so important.


🎥 Watch the full video here:

https://youtu.be/QDgILhe3fGs





🔧 What You’ll Learn in This Video:



  • How to correctly install a new clutch and pressure plate on your BMW
  • What that centre section of the pressure plate actually does
  • Tips for aligning the clutch disc perfectly
  • Common mistakes to avoid during clutch fitting
  • Step-by-step visuals that make the job easier, even for DIY mechanics






🚗 Why This Guide Helps



Whether you’re a weekend DIYer or an aspiring mechanic, understanding clutch assembly is key to a smooth drive. The video breaks down every step with clear explanations and close-up shots, making it easy to follow — no guessing, no confusion.


This guide is especially helpful for:


  • BMW owners doing their own repairs
  • Mechanics who want a refresher on clutch fitting
  • Anyone curious about how clutch systems work






🛠️ Tools and Parts Used



  • Clutch alignment tool
  • Torque wrench
  • Socket set
  • Genuine or OEM BMW clutch kit
  • Pressure plate bolts (recommended replacement)



Always make sure to check torque specs and replace the flywheel bolts if needed for a reliable installation.





✅ Final Thoughts



Fitting a clutch doesn’t have to be intimidating — it’s all about understanding how each component works together. Once you know what that part in the middle of the pressure plate does, the whole system makes much more sense!


📺 Watch now and learn step-by-step:

https://youtu.be/QDgILhe3fGs


💬 Don’t forget to like, comment, and subscribe to How2Fixit for more car repair tips and step-by-step guides!


Comments

Post a Comment

Popular posts from this blog

PSA 1.2 Puretech oil pressure fault. P15a8.

f you own a car with the PSA 1.2 Puretech Engine then this post is for you.  This engine is fitted to many vehicles including   Ford, Peugeot, Citroen, and Vauxhall’s  It has come apparent that these engines fault at about 40k miles.  The symptoms. 1. Upon almost first few accelerations from setting off the engine light comes on.  2. The vehicle odometer near 40k or multiples of.  3. Flagging fault P15A8 on diagnostic tool. This is a oil pressure fault   The problem.  This engine although a good engine with some fantastic technology built in has a timing belt that is inside the engine.  This may have seemed a good idea to the designers but it deteriorates in the engine oil, flaking off and clogs and blocking the oil pick up. If left could end up in major engine failure.  The solution.  Quite simple really, remove sump (easy task) check and clean oil pick up. Then change cambelt. Quite a Job.  If you want to see how to diagnose ...
1 comment
Read more

Cheap tools or expensive premium tools?

OK so I get the argument. I got the best tools, snap on, Mac tools etc with a lifetime guarantee! The other guy, your mate says  “Look at these tools I just bought really cheap, why pay the price you paid when you can have them for a fraction of the price”. In my experience after 25 years in the motor trade I have come to a conclusion. But before I reveal, I have to say at the start of my time as a mechanic,I was snap on tools all the way. Unfortunately now after paying a stupid amount for tools it doesn’t matter. What good is a tool you Left on the bulkhead under the bonnet costing £60, or a tool that cost you £6. I know the answer. It’s no good. But the £6 one is easily replaceable. What’s more is that in my time in the trade I have found the quality to be almost as good as some premium tools. Not to say it’s the same. To conclude if you are totally obsessed with your tools and you put them away after every use definitely consider the premium tool. But if you’re the busy me...
Post a Comment
Read more

How2fixit Hits 1000 subscribers

 How2fixit has just hit a new milestone, 1000 subscribers.  It’s been some time since I wrote a post. So thought I would make an update.  Got some really good content now. Over 100 videos/tutorials.  One of the latest series is covering a common fault with the PSA Puretech 1.2 engine. This is fitted to loads of vehicles including many ford, Peugeot, Citroen and some vauxhall cars.  https://m.youtube.com/c/how2fixit1/videos Please feel free to take a look 
Post a Comment
Read more