Skip to main content

Laser 6200 Engine Timing Lock Kit – How to Easily Assemble and Use (PSA 1.0 & 1.2 Engines)

Check out our latest video  

In this video, I’ll show you how to easily assemble and use the Laser 6200 engine timing lock kit, specifically designed for PSA 1.0 and 1.2 engines (Peugeot, Citroën, and Vauxhall/Opel models with the 3-cylinder PureTech engines). Whether you’re tackling a timing belt replacement or setting engine timing from scratch, this guide covers everything you need to know.


✅ Step-by-step assembly of the Laser 6200 kit

✅ Correct positioning for crankshaft and camshaft locks

✅ Tips for avoiding common mistakes

✅ Ideal for timing belt service or engine rebuilds





This is a must-watch if you’re working on the 1.0 or 1.2 PSA engines used in vehicles like the Peugeot 208, Citroën C3, and Vauxhall Corsa with the PureTech petrol engines.


🔧 Tools Used: Laser 6200 Locking Kit

📦 OEM Equivalent Part Numbers Covered


👉 Subscribe for more DIY car repair guides and tool walkthroughs!


#Laser6200 #PSAengineTiming #PureTechTiming #PeugeotTimingKit #CitroenTimingKit #TimingLockKit #DIYCarRepair #How2FixIt #PSA12Engine #LaserTools #CarMaintenance


Comments

Post a Comment

Popular posts from this blog

PSA 1.2 Puretech oil pressure fault. P15a8.

f you own a car with the PSA 1.2 Puretech Engine then this post is for you.  This engine is fitted to many vehicles including   Ford, Peugeot, Citroen, and Vauxhall’s  It has come apparent that these engines fault at about 40k miles.  The symptoms. 1. Upon almost first few accelerations from setting off the engine light comes on.  2. The vehicle odometer near 40k or multiples of.  3. Flagging fault P15A8 on diagnostic tool. This is a oil pressure fault   The problem.  This engine although a good engine with some fantastic technology built in has a timing belt that is inside the engine.  This may have seemed a good idea to the designers but it deteriorates in the engine oil, flaking off and clogs and blocking the oil pick up. If left could end up in major engine failure.  The solution.  Quite simple really, remove sump (easy task) check and clean oil pick up. Then change cambelt. Quite a Job.  If you want to see how to diagnose ...
1 comment
Read more

How2fixit Hits 1000 subscribers

 How2fixit has just hit a new milestone, 1000 subscribers.  It’s been some time since I wrote a post. So thought I would make an update.  Got some really good content now. Over 100 videos/tutorials.  One of the latest series is covering a common fault with the PSA Puretech 1.2 engine. This is fitted to loads of vehicles including many ford, Peugeot, Citroen and some vauxhall cars.  https://m.youtube.com/c/how2fixit1/videos Please feel free to take a look 
Post a Comment
Read more

Cheap tools or expensive premium tools?

OK so I get the argument. I got the best tools, snap on, Mac tools etc with a lifetime guarantee! The other guy, your mate says  “Look at these tools I just bought really cheap, why pay the price you paid when you can have them for a fraction of the price”. In my experience after 25 years in the motor trade I have come to a conclusion. But before I reveal, I have to say at the start of my time as a mechanic,I was snap on tools all the way. Unfortunately now after paying a stupid amount for tools it doesn’t matter. What good is a tool you Left on the bulkhead under the bonnet costing £60, or a tool that cost you £6. I know the answer. It’s no good. But the £6 one is easily replaceable. What’s more is that in my time in the trade I have found the quality to be almost as good as some premium tools. Not to say it’s the same. To conclude if you are totally obsessed with your tools and you put them away after every use definitely consider the premium tool. But if you’re the busy me...
Post a Comment
Read more