Skip to main content

PSA 1.2 Puretech oil pressure fault. P15a8.

f you own a car with the PSA 1.2 Puretech Engine then this post is for you. 

This engine is fitted to many vehicles including  

Ford, Peugeot, Citroen, and Vauxhall’s 

It has come apparent that these engines fault at about 40k miles. 

The symptoms.

1. Upon almost first few accelerations from setting off the engine light comes on. 

2. The vehicle odometer near 40k or multiples of. 

3. Flagging fault P15A8 on diagnostic tool. This is a oil pressure fault  

The problem. 

This engine although a good engine with some fantastic technology built in has a timing belt that is inside the engine. 

This may have seemed a good idea to the designers but it deteriorates in the engine oil, flaking off and clogs and blocking the oil pick up. If left could end up in major engine failure. 

The solution. 

Quite simple really, remove sump (easy task) check and clean oil pick up. Then change cambelt. Quite a Job. 

If you want to see how to diagnose and solve this on your psa 1.2 Puretech Engine i have made some how to tutorials on my YouTube channel. Here’s the links.


PSA Puretech Engine light on - quick and easy diagnostic check. p15a8


Psa Puretech Engine fault 

Psa Puretech Fault,fix and repair

Psa 1.2 Puretech timing belt change



 

Comments

  1. Anonymous7 September 2024 at 14:43

    Hello my car on motorway after 60 mph car loose power and management sigh coming and fan is on code showing p1339 🙏

    ReplyDelete

Post a Comment

Popular posts from this blog

How2fixit Hits 1000 subscribers

 How2fixit has just hit a new milestone, 1000 subscribers.  It’s been some time since I wrote a post. So thought I would make an update.  Got some really good content now. Over 100 videos/tutorials.  One of the latest series is covering a common fault with the PSA Puretech 1.2 engine. This is fitted to loads of vehicles including many ford, Peugeot, Citroen and some vauxhall cars.  https://m.youtube.com/c/how2fixit1/videos Please feel free to take a look 
Post a Comment
Read more

Vauxhall vivaro and movano knocking or banging noise on front.

I have recently experienced on the vauxhall vivaro and movano on two occasions these models have had a really bad knocking or banging noise. After initial inspection nothing has been found.  Firstly, It’s worth noting at this point that these models are prone to the front top suspension mounting collapsing. This can be simply be diagnosed by looking at the top mount under the bonnet. If faulty the will be a significant gap and it will also be slightly offset. Not central. After inspection this is what happens to the top mounts. Secondly, If this is not the cause of the noise and after frustration trying to find find the noise it is worth checking and tightening all the subframe bolts and wishbone bolts. These may appear tight and show no signs of wear. Once completed road test and listen. Hopefully now the knocking will have gone. 
1 comment
Read more